Diy Ikea Pegboard Accessories

The first time I mounted an IKEA pegboard on my garage wall, I was struck by how simple it was — but also how little I knew about what to do with it. I had visions of tools neatly organized, maybe a few hooks for hanging garden gloves or a place to store my power drill. But I quickly realized that without the right DIY IKEA pegboard accessories, the board would be nothing more than a blank canvas. Over the next few weeks, I experimented with different ideas, from custom tool holders to magnetic strips for screwdrivers, and eventually came up with a system that made my workflow so much smoother.^[3]

What I learned was that the key to making a pegboard functional and beautiful is to create your own DIY IKEA pegboard accessories. Whether you're trying to store small items like nails and screws or need a way to hang larger tools, making your own accessories gives you full control over your space. I've tried off-the-shelf solutions, and while they work, they never quite fit the way I wanted them to. That's why I've started building my own — and I'm excited to share exactly how I do it.^[4]

If you're new to working with pegboards, or even if you've used one before, this guide is for you. I'm going to walk you through the process of creating DIY IKEA pegboard accessories that are both practical and stylish. I'll explain the materials you'll need, the tools required. Even share a few of my favorite hacks that have made my pegboard setup one of the most useful pieces of furniture in my home.^[5]

Understanding Your Pegboard Setup

As of August 2026, I started by measuring my pegboard and noting where the mounting holes were. IKEA pegboards typically have a grid of holes spaced 2 inches apart, which makes it easy to plan your storage setup. I sketched a rough layout on paper, indicating where I wanted to place my tools, materials, and any accessories I planned to build.^[1]

This planning step was crucial because it helped me avoid clutter and ensure that everything I needed would be within easy reach. I also made a list of the tools I wanted to store, from my screwdrivers and pliers to my larger items like hammers and clamps. This helped me determine how many hooks, slots, or custom brackets I'd need.

Once I had a clear idea of what I wanted to store and how, I moved on to the next step — creating my DIY accessories. I found that knowing exactly what I needed made the process much more straightforward and helped me stay focused on what mattered.

Part of our Pegboard desk guide.

Choosing the Right Materials for Accessories

I used scrap wood from an old project for my first DIY pegboard accessories. It was thick enough to hold the weight of my tools and had a natural wood grain that looked great. I also found that using wood screws and washers helped secure everything firmly without damaging the pegboard.

For the magnets, I purchased small neodymium magnets from a local hardware store. They're strong enough to hold up screwdrivers and other small metal tools, and they didn’t interfere with the pegboard's mounting system. I also used epoxy to attach the magnets to the wood, which gave them a strong, lasting bond.

Another great option is to use 3D-printed brackets or slots. I found a few designs online that I could print with my home 3D printer. They were precise, and I loved the flexibility of being able to adjust the shape and size to fit my needs perfectly.

The right materials not only look great but also make your pegboard system last longer.

Related: Diy pegboard shelf

Related: Diy pegboard bunnings

Related: Diy pegboard hooks

Related: Diy Pegboard Accessories

Related: Diy Pegboard Ikea

Building Custom Tool Holders

I started by cutting a piece of wood to fit between two pegs on my board. I used a saw to make the cuts and then sanded the edges to smooth them out. Once the wood was ready, I drilled a hole in the center and inserted a metal rod for my screwdrivers to hang from.

I also added some slots to the sides of the wood for smaller tools like pliers and wrenches. I used a jigsaw to cut the slots and then filed the edges to make sure they were smooth and safe to handle. I found that this method worked well for both large and small tools, and I was able to fit everything on my board without any issues.

To make the tool holders more stable, I used wood screws to attach them to the pegboard. I also added a small amount of wood glue to the back for extra reinforcement. The result was a sturdy, custom tool holder that looked great and worked perfectly for my needs.

“The first time I mounted an IKEA pegboard on my garage wall, I was struck by how simple it was — but also how little…”— DIY Furniture with Pegboard editors

Creating Magnetic Strips for Easy Access

I found that using small neodymium magnets was the easiest way to create magnetic strips for my pegboard. I attached them to small pieces of wood and then mounted those pieces on the board. The magnets worked well for holding up screwdrivers and other small tools, and I found that they were easy to install and remove as needed.

I also used some leftover wood from another project to create the base for the magnetic strips. I cut the wood into small rectangles and then attached the magnets to each one. Once the magnets were in place, I used a small amount of wood glue to secure them to the board.

One of the things I loved about this setup was that the magnetic strips didn’t interfere with the pegboard’s mounting system. They were lightweight and didn’t add any extra stress to the board. Plus, the magnets were strong enough to hold up my small tools without any issues.

Adding Custom Brackets for Larger Items

For larger items, I used brackets that I designed myself. I cut a piece of wood to fit around the item and then attached it to the pegboard using wood screws. I found that this method worked well for items like clamps and hammers, and I was able to mount them securely without any problems.

I also used some leftover wood from another project to create the brackets. I cut the wood into the right size and shape and then used wood screws to attach them to the board. The brackets were sturdy and didn’t add any extra weight to the board.

Another great option was to use 3D-printed brackets. I found a few designs online that I could print with my home 3D printer. They were precise and I loved the flexibility of being able to adjust the shape and size to fit my needs perfectly.

Finishing Touches for a Polished Look

After I had all my accessories mounted, I decided to paint them to match the color of my pegboard. I used a small brush to apply the paint and then let it dry completely before attaching the accessories. The result was a cohesive, organized look that looked great in my workshop.

I also used some wood stain to give the accessories a more natural look. I found that the stain worked well with the wood and gave it a nice, finished appearance. I applied the stain with a small brush and then let it dry completely before attaching the accessories.

For a more modern look, I used some metallic paint on some of the accessories. It added a nice touch of style and helped the accessories stand out against the board. The result was a polished, professional look that looked great in my workshop.

Finishing touches can make all the difference in how your DIY pegboard accessories look and feel.

Maintaining and Updating Your Pegboard System

I learned that it's important to check the pegboard system regularly to make sure everything is still secure. I found that using wood screws and washers helped keep everything in place, but over time, some of the screws loosened up. I made it a habit to check the system every few months and tighten any loose screws as needed.

I also found that using a small amount of wood glue on the back of the accessories helped keep them from moving around. I used a small brush to apply the glue and then let it dry completely before attaching the accessories. This helped keep everything in place and made the system more stable.

Another thing I learned was that it's important to update the pegboard system as your tools and needs change. I found that I needed to add more slots and brackets as my collection of tools grew. I made it a point to keep track of what I needed and updated the system as needed.

Diy Ikea Pegboard Accessories